Video for Humhold Celing fan with lighits-HDFSD-L02-BK & HDFSD-L02-WT
Download Celing fan with lighits-HDFSD-L02-BK Manual
Click the button below to download the PDF file.
Download Celing fan with lighits-HDFSD-L02-WT Manual
Click the button below to download the PDF file.
FAQ
Q: Is it wireless?
A: It is hardwired into a power source.
Q: Can this be installed with the light on one switch, fan on separate switch?
A:Our current fan light fixture allows for wall switch control of the light but does not support fan control through the switch. Fortunately, the fan and light can each be controlled separately using a remote control or via the App.
Q: Is the LED light replacetable?
A: Yes, the LED component is replacetable.
Q: How to clean the blades?
A: This ceiling fan needed to be disassembled for cleaning.
Q: How do you find the app?
A: Scan the QR code shown in the manual and download the App.
Q: How to pair the ceiling fan with the remote control
A: Connect the ceiling fan to the power supply and confirm that the White light turns on through the wall switch;
Turn off the ceiling fan Through the wall switch for 5~10 seconds and then turn it on again Through the wall switch;
Long press the power button (the one on the left top side) on the remote control till the light flashes 3 times rapidly, then let go of your hand ;
The code pairing of the remote control is successful. At this time, you can press the button to control the device.
NOTE:If you do not see the light flash, please reset the fan for 3 times(repeat the following steps for 3 times):
Turn on the wall switch that controls the fan's power.
Turn it off and wait for about 5 seconds.
Turn the switch back on.
Then Long Press the power button aiming at the ceiling fan.
Q: How to connect the ceiling fan to the App?
A:1.Turn on the Bluetooth and 2.4 GHz Wi-Fi on your smartphone. Download the "Fan Lamp Pro" from the app store, open it, and proceed to add a new device with a name, for example, "Fan 1."
Allow nearby devices to connect
Read the instructions carefully and click Agree
2. Turn on the ceiling fan using the wall switch at your home, not the remote control.
3. Press the pairing button on the app, then you will hear a beep sound and the light will flash, this means that it is paired successfully
If you do not hear a beep sound or see the light flash, please reset the fan:
Turn on the wall switch that controls the fan's power.
Turn it off and wait for about 5 seconds.
Turn the switch back on.
To pair with the app, press the pairing button on the app approximately three times until you hear a beep from the fan and see the light flash.
Q: Does this ceiling fan work with Alexa?
A: Only the RGB ones can work with Alexa and Google home
Q: Can this fan be installed on a sloped ceiling?
A: Yes, it can be installed on a sloped ceiling