Video for Humhold Celing fan with lighits-HDFSD-E03-BK & HDFSD-E03-SR
Download Celing fan with lighits-HDFSD-E03-BK Manual
Click the button below to download the PDF file.
Download Celing fan with lighits-HDFSD-E03-SR Manual
Click the button below to download the PDF file.
FAQ
Q: Is it wireless?
A: It is hardwired into a power source.
Q: Can this be installed with the light on one switch, fan on separate switch?
A:Our current fan light fixture allows for wall switch control of the light but does not support fan control through the switch. Fortunately, the fan and light can each be controlled separately using a remote control or via the App.
Q: Is the LED light replacetable?
A: Yes, the LED component is replacetable.
Q: How to clean the blades?
A: This ceiling fan needed to be disassembled for cleaning.
Q: How do you find the app?
A: Scan the QR code shown in the manual and download the App.
Q: How to pair the ceiling fan with the remote control
A: Connect the ceiling fan to the power supply and confirm that the White light turns on through the wall switch;
Turn off the ceiling fan Through the wall switch for 5~10 seconds and then turn it on again Through the wall switch;
Long press the power button (the one on the left top side) on the remote control till the light flashes 3 times rapidly, then let go of your hand ;
The code pairing of the remote control is successful. At this time, you can press the button to control the device.
NOTE:If you do not see the light flash, please reset the fan for 3 times(repeat the following steps for 3 times):
Turn on the wall switch that controls the fan's power.
Turn it off and wait for about 5 seconds.
Turn the switch back on.
Then Long Press the power button aiming at the ceiling fan
video link:https://www.youtube.com/watch?v=rDbYKOw4UeI
Q: How to connect the ceiling fan to the App?
A:1. Connect the ceiling fan to the power supply and confirm that the device can work normally (the light turns on slowly);
2. Turn on the Bluetooth and 2.4 GHz WiFi on your smartphone
and download the "Smart Life" App from the App Store.
3. Continuous ON-OFF-ON-OFF-ON Power on and off ( Turn the switch on your wall to control on and off, not the on/off button on the remote control. Power on for 2-3 seconds, and power off for 5-10 seconds) till the light flashes rapidly (After the operation, the light should flash rapidly which is the state that can be paired and searched.)
4. Open the Smart Life App, click Add Device in the upper right corner
Note: when the light flashes, wait for the App to search for the devices, it will appear automatically
Here is a video link for your reference:https://www.youtube.com/watch?v=C21FCBaCFzI
Q: How to connect to the Alexa?
A: 1.Download Smart Life app and install it , open the app, register an account, and then log in to the app.On the homepage of the app, tap "+ "in the top right corner and add a device as instructed.
Go to the control panel of the newly added device, tap the edit icon in the top right corner of the page to enter the device details page, and then change the device name to a simple one in English.
2.Download Amazon Alexa app and install it.Configure Amazon Echo in Alexa mobile app
Prerequisites:
The Echo is powered on.
The Echo is connected to a Wi-Fi network over which Amazon services are accessible.
Open the Amazon Alexa app.
Enter the Amazon account and password, and tap SIGN IN.
After successful login, in the bottom right corner of the Home page, tap More > Add a Device, and on the SETUP page that appears, select the Amazon Echo brand.
Select your Echo device type and tap CONTINUE to configure the Echo.
When the page Wait for the orange light appears, press and hold the action button until the light ring turns orange. Tap CONTINUE to connect the mobile phone to the hotspot of the Echo, and tap CONTINUE.
Select a Wi-Fi network to which the Echo will be connected. Enter the Wi-Fi password and tap CONNECT. It takes several minutes for the Echo to successfully connect to the Wi-Fi network.
Then, tap CONTINUE. A video walkthrough appears to help get you started. At the end of the video, tap NEXT to navigate to the Home page of Alexa. Now, the Echo is configured.
3.Use Alexa app to start binding Smart Life app with Alexa, please refer to the photo
4.The Echo needs to discover a device before it can control the device. The device discovery page automatically appears after the Smart Life is bound. Tap DISCOVER DEVICES to search for devices. You can also say to the Echo: “Alexa, discover devices.” Then, the Echo starts searching for smart devices that are paired with the Smart Life app. The Echo reports the search result about 20 seconds later and the Alexa app displays the discovered devices in a list.
Use voice commands to control device
reference video link:https://www.youtube.com/watch?v=bR00rraFLQs
Q: Can this fan be installed on a sloped ceiling?
A: Yes, it can be installed on a sloped ceiling.
Q: How many lumens?
A: The LED light beads provide a brightness of around 150 lumens on their own.When the light beads are fitted with a light shade, it is about 75 lumens